Email Address

sales@yayeindustrial.com

Phone Number

+8613757757792

yayeindustrial

SA 213 T11 Boiler Tube

Home|SA 213 T11 Boiler Tube

Trusted Supplier of ASTM A213 T11 Seamless Boiler Tubing in China

Trusted Supplier of ASTM A213 T11 Seamless Boiler Tubing in China

Stockist of UNS K11597 T11 Boiler Tube in Wenzhou ,T11 Boiler Tube widely used in High-temperature Applications, Refer Specification

SA 213 T11 tube Specification

pipe size icon

UNS k11597 t11 boiler Seamless tube Sizes

  • 6.35 to 101.60 mm
welded pipe size icon

ASTM A213 t11 seamless tube Welded Pipe Sizes

  • Length: max 1-12m
pipe manufacturing process

ASME SA213 t11 seamless tubing Manufacturing Process

  • Hot finished seamless
  • Cold drawn seamless
Pipe Surface Finish

A213 t11 material Surface Finish

  • Soft/ Cold-finished
  • Normalized
  • Annealed
  • Hard/ Cold-finished
Pipe Testing

A213 t11 hot finished tube Testing

  • Chemical
  • Ultrasonic
  • flattening test
Standards

t11 steel cold drawn tube Standards

  • ASTM A213, ASME SA213
Applications

T11 steel cold drawn tube Application

  • Heat exchangers
  • Boiling water tube
  • Aircraft industry
  • Heat exchangers
  • Superheated pipelines
Documentation

1.7338 furnace tubes Documentation

  • PMI Test Reports
  • Visual Inspection
  • Mill Test Certificates
Origins

A213 t11 superheater tubes Origins

  • China
  • Spain, India
  • Janpanese
  • USA
pipe Types

Types of SA213 t11 superheater tubes

  • Rectangle
  • Square
  • Round
  • Hydraulic
Packaging

SA213 t11 superheater tube Packaging

  • Wooden Box
  • Bundled
  • Bubble Wraps
Advantages

SA213 t11 superheater tubes Advantages

  • Durability and Longevity:
  • Corrosion Resistance:
  • Higher Temperature Resistance:
  • Aesthetic Appeal:
Measurement

Measurement of SA213 t11 superheater tubes

  • Straightness, Ovality
  • Thickness, Length
  • Inner diameter
  • Outer diameter
Disadvantages

ASTM A213 t11 seamless tube Disadvantages

  • Weldability and Fabrication:
  • Cost:
  • Lower Strength-to-Weight Ratio:
  • Thermal Conductivity:
End Types

SA 213 gr t11 tubing End Types

  • Threaded
  • Plain end
  • Bevel end
Features

Features of ASME sA213 t11 seamless tubing

  • high oxidation
  • corrosion-resistant

Types of SA 213 T11 Boiler Tube


SA 213 T11 Boiler Tube Supplier in China Provides a Wide Range of Regularly Used Pipe Types.


a 213 t11 Seamless tube

A 213 t11 Seamless tube

ASTM A213 t11 Welded tube

ASTM A213 t11 Welded tube

uns k11597 t11 boiler tube ERW Tube

UNS k11597 t11 boiler tube ERW Tube

alloy steel sa square tube

Alloy steel SA square tube

stm A213 t11 Rectangular tube

ASTM A213 t11 Rectangular tube

sa 213 gr t11 Round tube

SA 213 gr t11 Round tube

ASME sA213 t11 seamless Tube

ASME SA213 t11 seamless Tube

sA213 t11 EFW Tube

SA213 t11 EFW Tube

t11 steel cold drawn Welded Tube

T11 steel cold drawn Welded Tube


SA213 T11 Tube Size Chart

sA213-t11-tube-size-chart

Size Thickness ID Lbs per Foot Price(£)
3/16
0.028 0.132 0.048
7/16
0.028 0.382 0.123 15.12
1/4
0.028 0.194 0.067 8.15
0.035 0.18 0.08 4.52
0.049 0.152 0.105 7.09
0.058 0.134 0.119 16.94
0.065 0.12 0.128 10.73
5/16
0.028 0.257 0.085 9.72
0.035 0.243 0.104 6.71
0.049 0.215 0.138 8.71
0.058 0.197 0.158 8.15
0.065 0.183 0.172 9.90
0.095 0.123 0.221 8.71
3/8
0.028 0.319 0.104 6.59
0.035 0.305 0.127 5.45
0.049 0.277 0.171 5.65
0.058 0.259 0.196 5.45
0.065 0.245 0.215 5.27
0.083 0.209 0.259 9.41
0.095 0.185 0.284 7.51
7/16
0.035 0.368 0.151 5.58
0.049 0.34 0.204 7.15
0.065 0.308 0.259 6.59
0.095 0.248 0.348 9.41
0.12 0.198 0.408 9.47
1/2
0.028 0.444 0.141 6.01
0.035 0.43 0.174 4.82
0.049 0.402 0.236 5.45
0.058 0.384 0.274 4.39
0.065 0.37 0.302 6.84
0.083 0.334 0.37 6.14
0.095 0.31 0.411 9.41
0.12 0.26 0.487 7.49
9/16
0.035 0.493 0.197 10.35
0.049 0.465 0.269 7.02
0.065 0.433 0.346 11.61
0.12 0.323 0.568 11.23
5/8
0.028 0.569 0.179 6.71
0.035 0.555 0.221 5.45
0.049 0.527 0.301 4.95
0.058 0.509 0.351 5.00
0.065 0.495 0.389 8.53
0.095 0.435 0.538 9.90
0.12 0.385 0.647 6.71
0.156 0.313 0.781 12.40
3/4
0.028 0.694 0.216 7.22
0.035 0.68 0.267 4.57
0.049 0.652 0.367 4.19
0.058 0.634 0.429 4.19
0.065 0.62 0.476 5.45
0.095 0.56 0.665 9.41
0.12 0.51 0.807 7.47
0.156 0.438 0.99 9.41
0.188 0.374 1.128 13.23
7/8
0.035 0.805 0.314 4.90
0.049 0.777 0.432 5.96
0.058 0.759 0.506 5.71
0.065 0.745 0.562 6.46
0.083 0.709 0.702 6.21
0.095 0.685 0.791 7.83
0.12 0.635 0.968 9.47
0.188 0.499 1.379 15.68
1
0.035 0.93 0.361 4.95
0.028 0.944 0.291 8.46
0.049 0.902 0.498 4.70
0.058 0.884 0.584 4.64
0.065 0.87 0.649 4.70
0.095 0.81 0.001 5.53
0.12 0.76 1.128 9.41
0.156 0.688 1.406 13.18
0.188 0.624 1.63 15.98
1-1/8
0.035 1.055 0.407 9.90
0.049 1.027 0.563 6.71
0.058 1.009 0.661 5.58
0.065 0.995 0.736 6.71
0.095 0.935 1.045 8.46
0.12 0.885 1.288 14.80
1-1/4
0.035 1.18 0.454 7.02
0.049 1.152 0.629 6.59
0.058 1.134 0.738 8.15
0.065 1.12 0.823 6.71
0.083 1.084 2.132 6.71
0.095 1.06 1.172 7.34
0.12 1.01 1.448 11.03
0.156 0.938 1.823 18.25
1-3/8
0.049 1.277 0.694 8.59
0.035 1.305 0.501 7.40
0.058 1.259 0.816 6.71
0.065 1.245 0.909 5.71
0.095 1.185 1.299 7.22
0.12 1.135 1.609 12.17
0.188 0.999 2.383 16.18
1-1/2
0.035 1.43 0.548 8.46
0.049 1.402 0.759 7.15
0.058 1.384 0.893 8.63
0.065 1.37 0.996 7.47
0.083 1.334 1.256 8.28
0.095 1.31 1.426 8.46
0.12 1.26 1.769 11.03
0.188 1.124 2.634 17.42
1-5/8
0.049 1.527 0.825 12.51
0.058 1.509 0.971 13.18
0.065 1.495 1.083 9.41
0.095 1.435 1.552 12.04
0.12 1.385 1.929 14.67
0.156 1.313 2.447 17.42
0.188 1.249 2.885 18.18
1-3/4
0.049 1.652 0.89 9.85
0.058 1.634 1.048 11.27
0.065 1.62 1.17 10.03
0.095 1.56 1.679 8.71
0.12 1.51 2.089 12.35
0.188 1.374 3.136 19.69

SA 213 gr t11 tubing Weight Chart

Nominal Pipe Size Section Modulus Gallon Capacity Per Linear Foot Pipe Inner Diameter Weight per Foot Standard to XXHY Pipe Outer Diameter Wall Thickness Schedule
Pipe #
1 1/4 .2346 .0777 1.380 2.27 STD 1.66 0.140 40
.2913 .0666 1.278 3.00 XHY 0.191 80
.3421 .0549 1.160 3.77 0.250 160
.4110 .0328 0.896 5.22 0.382
1 1/2 .3262 .1058 1.610 2.72 STD 1.90 0.145 40
.4118 .0918 1.500 3.63 XHY 0.200 80
.5079 .0730 1.338 4.86 0.281 160
.5977 .0494 1.100 6.41 0.400
2 .4205 .1898 2.157 2.64 2.375 0.109 10
.5606 .1743 2.067 3.66 STD 0.154 40
.7309 .1534 1.939 5.03 XHY 0.218 80
.8045 .1434 1.875 5.68 0.250
.8666 .1344 1.813 6.29 0.281
.9806 .1161 1.687 7.47 0.344 160
1.1043 .0922 1.503 9.04 XXHY 0.436
1/2 .0407 .0158 0.622 0.85 STD 0.84 0.109 40
.0478 .0122 0.546 1.09 XHY 0.147 80
.0528 .0088 0.464 1.31 0.188 160
.0577 .0026 0.252 1.72 XXHY 0.294
3/4 .0705 .0277 0.824 1.13 STD 1.05 0.113 40
.0853 .0225 0.742 1.48 XHY 0.154 80
.1006 .0153 0.612 1.95 0.219 160
.1103 .0077 0.434 2.44 XXHY 0.308
1 .1328 .0449 1.049 1.68 STD 1.315 0.133 40
.1606 .0374 0.957 2.17 XHY 0.179 80
.1904 .0271 0.815 2.85 0.250 160
.2136 .0146 0.599 3.66 XXHY 0.358
2 1/2 .6870 .2833 2.635 3.53 2.875 0.120 10
1.0640 .2487 2.469 5.80 STD. 0.203 40
1.1169 .2435 2.443 6.14 0.216
1.2468 .2301 2.375 7.02 0.250
1.3386 .2202 2.323 7.67 XHY 0.276 80
1.6371 .1842 2.125 10.02 0.375 160
1.9971 .1280 1.771 13.71 XXXHY 0.552
3 1.0411 .4336 3.260 4.34 3.50 0.120
1.3122 .4147 3.188 5.58 0.156
1.4265 .4064 3.156 6.12 0.172
1.5342 .3984 3.124 6.66 0.188
1.7241 .3840 3.068 7.58 STD. 0.216 40
1.9372 .3672 3.000 8.69 0.250
2.1207 .3521 2.938 9.67 0.281
2.2253 .3431 2.900 10.26 XHY 0.300 80
2.8774 .2811 2.624 14.34 0.438 160
3.4243 .2158 2.300 18.6 XXHY 0.600
3 1/2 1.3776 .5768 3.760 4.98 4.0 0.120 10
2.3939 .5136 3.548 9.12 STD. 0.226 140
2.6001 .4998 3.500 10.02 0.250
2.8562 .4821 3.438 11.17 0.281
3.1400 .4617 3.364 12.52 XHY 0.318 80
4.8795 .3085 2..728 22.87 XXHY 0.636
4 1.7612 .7404 4.260 5.62 4.5 0.120 10
2.2354 .7156 4.188 7.24 0.156
2.6296 .6942 4.124 8.67 0.188
2.8173 .6838 4.094 9.32 0.203
3.0184 .6725 4.062 10.02 0.219
3.2145 .6613 4.026 10.80 STD. 0.237 40
3.3611 .6528 4.000 11.36 0.250
3.7021 .6326 3.938 12.67 0.281 60
4.0273 .6126 3.876 13.97 0.312
4.2713 .5972 3.826 15.00 XHY 0.337 80
5.1790 .5361 3.624 19.02 0.438 120
5.8997 .4822 3.438 22.53 0.531 160
6.7927 .4054 3.152 27.57 XXHY 0.674
5 4.1161 1.0979 5.187 10.80 5.563 0.188
4.7279 1.0716 5.125 12.51 0.219
5.4500 1.0391 5.047 14.63 STD. 0.258 40
5.8644 1.0204 5.001 15.87 0.281
6.4074 .99647 4.939 17.51 0.312
6.9358 .9696 4.875 19.19 0.344
7.4300 .9449 4.813 20.80 XHY 0.375 80
9.2534 .8495 4.563 27.06 0.500 120
10.7976 .7590 4.313 32.99 0.625 160
12.0954 .6734 4.063 38.59 XXHY 0.750
6 3.5769 1.6748 6.407 7.59 6.625 0.109 5
4.3475 1.6488 6.357 9.30 0.134 10
5.0107 1.6260 6.313 10.79 0.156
5.9351 1.5937 6.249 12.94 0.188
6.3804 1.5780 6.219 13.94 0.203
6.8261 1.5620 6.187 15.00 0.219
7.6905 1.5306 6.125 17.04 0.250
8.4958 1.5008 6.065 18.99 STD. 0.280 40
9.3416 1.4688 6.001 21.06 0.312
10.111 1.4391 5.937 23.10 0.344
10.893 1.4082 5.875 25.05 0.375
12.224 1.3541 5.761 28.60 XHY 0.432 80
13.711 1.2909 5.625 32.74 0.500
14.9806 1.2346 5.501 36.43 0.562 120
16.1821 1.1787 5.375 40.09 0.625
17.8243 1.0977 5.187 45.39 0.719 160
20.025 .9784 4.897 53.21 XXHY 0.864
21.7719 .8727 4.625 60.13 1.000
23.1237 .7809 4.375 66.14 1.125

Applications Of SA213 T11 superheater tubes

Applications Of sA213 t11 superheater tubes

Applications

  • Boiling water tube
  • Heat exchangers
  • High pressure steam pipeline
  • Electric power plants
  • Power generation
  • Energy industries
  • Automotive Industry
  • Superheated pipelines




T11 steel cold drawn tube Chemical Composition

Carbon Manganese Sulfur Phosphorous Chromium Silicon
0.15 Maximum 0.30 To 0.60 0.025 Maximum 0.025 Maximum 8.0 To 10.0 0.25 To 1.00

SA 213 T11 Boiler Tube Mechanical Properties

Hardness

179 max


Elongation

30 min


Tensile Strength

415 min

Yield Strength

205 min


SA213 T11 material HS Code

HS Code
73045110

Difference Between ASTM A213 T11 and T22 tube

Difference Between ASTM A213 t11 and t22 tube

T11 vs T22 tube

T11 T22
Lower Molybdenum percentage Superior mechanical qualities
Low-temperature strength High-temperature strength
Low corrosion resistance  High corrosion resistance
food processing equipment, architectural uses manufacturing pressure vessels, chemical processing equipment



What types of End Connections areused in Yaye Industrial sa 213 t11 boiler tubes?

  • Plugs and Caps – for closing off open pipe ends or fittings.
  • Y-bends – for making branch line connections at 45º.
  • Couplings – for connecting two pieces of pipe of the same size in a straight line.
  • Tees and Crosses – for making branch line connections at 90º

Copyright © 2025 Yaye Industrial | All rights reserved.